Side Liners For Dia.2.2m Mill Lining System With HRc56 Hardness And AK10J

Side Liners for Wet Mill

1. We keep bolt hole center distance within 2mm;

2. We can supply 40Cr bolt units to match our side liners.

3. Strict surface quality:

  3a. For each liner plate, only one imperfection is acceptable on the working surface and the other surfaces. 

  3b. Sand inclusion and blowholes open toward the surface are acceptable provided their bottom is visible 

     and provided their size does not exceed the following values: 

  3b1. Working surface: maximum depth is 5mm;

  3b2. Other surface: maximum depth is 10mm.